|Posted on June 4, 2017 at 1:40 AM||comments (0)|
DIY Maintenance Tips for Garage Door
Garage doors add curb appeal to your house. So, it is critical to maintain its quality and look. Whatever type of garage doors you have, it needs proper maintenance and regular lubrication to work all the time correctly.
It can be very easy to overlook your garage doors, but it is not a good idea because having any problems in your garage door is a danger and a big hassle. Garage doors are the largest moving objects in your home, and possibly, they are also the hardest working components. The average garage door electric openers raise and lower 150-250 pounds.
If you always want to have a garage door that is safe, quiet and operates smoothly, it is important to conduct a regular inspection. Here are DIY maintenance tips that you can do for your garage door.
Test the reversal system – This is one of the most important things that you need to do for the benefit of your garage doors. As a matter of fact, this is required by US Consumer Product Protection Commission.
This feature can cause you garage door to stop immediately and go back to its open position once detected an obstruction. Examining the auto stop features of your garage door is imperative, and you can do this by placing an object in the way of the closing door such as cinder block. Once the door detects the object you have placed, it should immediately reverse itself.
Evaluate visually – To be sure that the springs of your garage door are not broken or rusty, you need to evaluate it visually. Be cautious when it comes to the springs since they're under extreme tensions. If you have an idea on how to fix the issue, you can simply do it by yourself.
But if not, you can leave the repair, adjusting and replacement of the spring to a professional. When evaluating visually, look for those loose fasteners, hinges, worn tracks, crooked roller wheel and frayed cables. Rollers are typically being replaced after 3 or 4 years. It depends on the usage.
Test the motion system – If the obstructions move within range can cause to stop the closing door & reverse itself. So, it is vital to test the infrared movement system of your garage door, to ensure that it is working properly.
Lubricate the moving parts and tighten the loose bolts – Use silicone spray, lubricants or powder graphite to the springs, hinges, and rollers of your garage door. Every 3 to 4 years, wipe the springs of your garage door with the motor oil. Also, wipe the chain of its door opener with light oil since spraying can make a mess. But, do not lubricate rusty and broken springs as they could be a break.
Test the manual release – Checking the manual version of your garage door is also important. That can help you to find out if the door is not functioning well or it loses power during an outage. When testing its manual release, you should pull it and move your garage door up or down on your own. But, if it doesn't move easily, do not force it.
|Posted on April 22, 2017 at 2:35 PM||comments (0)|
How to Install a Garage Door
A Garage Door is a remarkable investment for the security, value, and safety of your property. A lot of garage door agencies have delivery and installation services offered along with their products that are great for homeowners. They are those who really would want for their garage door to be set up without a hassle. Nevertheless, if you like the idea of doing it yourself, setting it up is just easy and fast.
If you want to set up your garage door, then just go ahead. When getting it started, it is recommended having two people around when working on the project. In case that something wrong happens with it, it is just right to ask for somebody's help. Ensure that you check on the manual instruction that comes along with the garage door.
1. Attach weather stripping on the base border of the first panel of your garage door. The purpose is to keep it and for it to last longer.
2. Place the panel right through the doorway and compel nail part way into every jamb. The purpose is to ensure that it is properly fixed. It is best to set the nails at their slant position to keep the garage door in place.
3. Connect the hinges on top of the corner of the garage door
4. Check the guide to know how to assemble the different pieces. A list of guides will be integrated into the garage door.
5. Manager to set up the rollers or other brackets needed to the door part followed by jamb or wall mounted brackets.
6. Place the so-called vertical track right through the door rollers of the first part located on one corner of the doorway. Do the same procedure for the other angle.
7. You are now on the second segment of rollers. It is suggested to ask for someone's so that you balance the different rollers sections. Raise the section and set it in place. Then, slide the roller into the tracks on both corners.
8. When you move onto the next set of rollers, you need to attach the hinges of the 1st part to the second part. Use a power screwdriver so that the task is done easier and faster.
9. Follow the steps # 7 and 8 for the rest of the rollers except for the last one.
10. You will have to set up the curved and horizontal tracks. See the guides for detailed instructions as all roller doors are different.
11. Ensure that the so-called parallel track is even or is leveled.
12. Screw the so-called track hanger onto the framing and raise the track onto the rack. Do the same on the other part of the other track.
13. Set up the final roller section properly by following step #7 and #8.
14. Check to ensure the whole thing is secure. Then, give your door a try.
Installing your garage door is not difficult if you have the proper guide on your side. To ensure that the job is done fast and accurate, it is still suggested to call a professional.
|Posted on March 4, 2017 at 2:05 PM||comments (1)|
DIY Garage Door Fitting
When it comes to fitting a garage door, always remember that it will never be an easy job. Aforementioned is most especially when the door type involves a sectional, a roller, or a sliding door instrument. In this article, you will learn more about DIY garage door fitting.
One of the first jobs to consider is on choosing the right kind of garage door, or garage door replacement. The options to choose from include a side hinged, up and over, sectional, roller, sliding, remote control or manual operation.
An up and over garage door
Up and over garages door usually demand the fitting of a frame supporting the door into its different positions. In this door, it can exactly move through 90 degrees.
In frame fitting, it usually requires setting out of the frame and to its fixing points with the drill for the screw plugs. The fitting and the support of this type of frame will usually require the help of two people. In this regard, there are two different up and over the types of door frame to choose from. Nevertheless, it will depend on the door if it has a retractable motion or a canopy. If ever the frame is fitted on the garage door, it can then be adjusted to make the running mechanism smooth and easy.
A roller, sectional, as well as sliding garage door
A door that uses a sectional, roller and sliding opening and closing motion requires more planning, work and high precision level. In this door instrument, two sections of the door will be positioned in a steady contact along with the tracks. They need to be aligned vertically or horizontally.
Actually, it is essential to fit this type of door in order that it could move the easy and fast way possible.. When this is done, the tracks could fit well to it.
When it comes to a sliding door, the garage door tracks will move to one corner of the opening and more remote door storage. Therefore, it is essential to purchase the right track in order that the door will continue to open to its resting location. The track will also need to be fitted into the plumb, both below and above.
This also requires a smooth solid floor and the right strength of vertical wall, structural roof. There will also be less elasticity that could be observed right "after the fitting alteration of this door.
A sectional or a roller garage door is nevertheless a kind of door with a shift frame and a frame section, or a roller. This is another type of garage door that you may try to consider on a DIY garage door fitting.
Truly, it is vital to configure the conversion and storage parts of the casing. These must also exactly be in their good position. This is also wherein the whole frame section will be fitted properly and safely.
Now, you have understood more about the DIY garage door fitting and all other information relevant to it!
|Posted on February 25, 2017 at 9:40 PM||comments (1)|
DIY Garage Door Repair
After a tiring day at the workplace and a heavy traffic drive back home, all you want is a nice shower and a cup of tea while watching your favorite TV show. When you get home, you just press the remote control in opening the garage door easy and fast. Nevertheless, the garage door does not open yet, and the frustrations are all there in you. The best solution regarding this matter is to ask for a garage door repair.
In this case, most people will ask help from the experts immediately. For your case as well, it is better to use your phone to contact the garage door repair company. If you believe that it is just a small issue and you can solve it yourself. DIY garage door repair is an even better idea. With a manual that emphasizes troubleshooting guidelines, you could easily do all by yourself.
Here are the things you can do if your garage is not working correctly:
Remote failure is usually the common cause of a malfunctioning garage door. Always have a spare unit with you to know if the problem lies in your remote or something else.
If the remote is fine, check the sensors that get the signals from the remote. See to it that the sensors are not covered by dust as this could block the transmission of signals.
If you have checked your remote, check the rollers and hinges from where the gate moves. The purpose is to ensure that it is lubricated just right. This is the main reason why this thing gets worse. You need to necessarily spend an amount of money on the garage door repairs.
Check if the wires and cables are connected properly. The purpose is to ensure there are no mismatched cables. The primary indicator of this issue is called as jamming of your door in the middle or right next on the floor. Your door will fluctuate and will stop in the midst of opening and closing.
In addition to that, you also need to check the torsion spring. The opening and the closing of your garage door is controlled by the torsion spring set on top of the garage door. This is usually responsible for pulling the door when it is exposed to a high level of tension. This is risky and is the dangerous part which is why you must contact an expert. This is also unless you have the skill and equipment to use.
For other serious issues, contact an expert garage door repair company. You also need to check if the parts of the garage doors are outdated. These components have a practical limit. These also need to be changed after a particular time.
In case that any of the components have reached their expiration, you now need to get new parts from a renowned dealer or store. That is also if your want to have a good night sleep without worries if there are people who will enter the garage door!
|Posted on January 22, 2017 at 1:45 AM||comments (2)|
DIY Garage Door Spring Replacement
Setting up garage door springs is not usually recommended. That is unless it will be carried out by professionals. In this article, you will learn more about the replacement process. For other issues, it is essential to ask help from an expert for this job. Always remember that when you do it the wrong way, you might get injured.
If your want to set up your garage door springs, you need to be skilled enough, and you need to be well-versed about the process. The improper installation of springs brings harm to people in the end. If you are not sure about how to set up your garage door springs, call an expert. If you believe you can do it on your own, you could follow the manufacturer's guide.
1. If you are will replace old springs, like the torsion springs, you need to be very careful. These outdated springs are used when lifting 400lb door. This is especially when they are rusted or are hard to detach. They can also bring harm.
After detaching the old spring, get ready for setting up the new door. You would want to unpack the whole thing on your new garage door. There will also be a lot of parts that are usually found inside the box. All of these parts need to be present before starting the process.
2. The spring will sit on the torsion bar so that your garage door will be set up. The upper brackets will also be set in place before the installation of the springs. Each manual guide is also different. Therefore, you need to make sure that you follow the guides the right way. Setting up a new garage door is usually easy and is performed by one person. Nevertheless, you would like the idea of someone to help you out.
3. You may want to set up additional support for the torsion bar due to its weight. Each door is different while the walls of the garage are not tight. You may also need some extra brackets in this case. There are kits that come with additional brackets. Some also do not have these brackets.
Next, run the raising cable up to the drums that have been set up near the torsion spring. Wrap each end of the bar through the tube retainer. Place in the winding unit that places the torque on the garage spring. This is also essential in making the garage door spring functional.
It is the release of this torque which makes reinstating the springs dangerous. Once you make a mistake in this step, you will need to call an expert to fix it. If you have the right winds on your torsion spring, you would want to try it by lifting the garage door just a couple of inches. Screw in the set screws that were blocked right after the door was closed. Try the door by lifting it all the way up and then set the springs as desired.